dummyhead
dummyhead
WB20XT2•WB30XT2
AIR CLEANER
REMOVAL/INSTALLATION
When removing air cleaner elbow, remove the engine (WB20XT2 only) (page 11-2).
CARBURETOR SPACER
INSTALLATION:
Before installing, check for damage.
Note the installation direction.
Viewed from air cleaner side
BREATHER TUBE
AIR CLEANER COLLAR (2)
AIR CLEANER ELBOW NUT (6 mm) (2)
9 N·m (0.9 kgf·m, 6.6 lbf·ft)
WING NUT
1.2 N·m (0.1 kgf·m, 0.9 lbf·ft)
BOLT (6 x 20 mm)
COLLAR
AIR CLEANER ELBOW
REMOVAL/INSTALLATION:
Remove and install the air cleaner elbow
with the fuel valve lever in the OFF position
and the choke lever in the CLOSE position.
Before installation, clean the inside of the
air cleaner elbow.
FUEL SYSTEM
AIR CLEANER CAP
AIR CLEANER COVER
AIR CLEANER
ELEMENT
AIR CLEANER GRID
6-5