Honda WB20XT2 Manual page 114

dummyhead dummyhead
WB20XT2•WB30XT2
CRANKCASE COVER
REMOVAL/INSTALLATION
Drain the engine oil (page 3-3).
Remove the end plate (page 10-7).
OIL FILLER CAP
(With oil level gauge)
OIL FILLER CAP PACKING (2)
CHECK:
Replace if necessary.
DOWEL PIN (2)
CRANKCASE COVER
INSTALLATION:
Be careful not to damage the oil seal lips.
CASE COVER PACKING
BOLT
WB20XT2: (6 x 28 mm) (7)
12 N·m (1.2 kgf·m, 9 lbf·ft)
WB30XT2: (8 x 32 mm) (6)
24 N·m (2.4 kgf·m, 18 lbf·ft)
CRANKCASE
OIL FILLER CAP
13-3