Honda WB20XT2 Manual page 68

dummyhead dummyhead
WB20XT2•WB30XT2
IGNITION COIL
REMOVAL/INSTALLATION
Remove the following:
– Fan cover (page 5-2)
– Carburetor (page 6-6)
When installing, route the engine wire harness and
high-tension cord properly (page 2-8).
After installation, check the ignition coil air gap (page 8-7).
SPARK PLUG CAP
ENGINE WIRE HARNESS
HIGH-TENSION CORD
IGNITION COIL CONNECTOR
IGNITION SYSTEM
BOLT (6 x 25 mm) (2)
IGNITION COIL
8-3