Honda WB20XT2 Manual page 86

dummyhead dummyhead
INLET PIPE/OUTLET PIPE
PUMP
REMOVAL/INSTALLATION
WB30XT3
HOSE COUPLING PACKING
INSTALLATION:
Install the hose coupling packing [1]
in the groove [2] of the hose clamp
ring.
HOSE COUPLING (2)
HOSE CLAMP RING (2)
HOSE BAND (3)
10-2
FILLER CAP
[1]
OUTLET PIPE
[2]
SUCTION HOSE
(Commercially available)
SEAL RING
BOLT (10 x 32 mm) (4)
OUTLET
PACKING
INLET PIPE
BOLT (10 x 32 mm) (4)
STRAINER
INLET VALVE
INSTALLATION:
Check the inlet valve for breakage or
damage. Align the tab [1] on the inlet
valve with the groove [2] of the inlet pipe.
ALIGN
[1]
HOSE COUPLING PACKING
INSTALLATION:
Install the hose
[1]
coupling packing
[1] in the groove
[2] of the hose
clamp ring.
[2]
[2]