Honda WB20XT2 Manual page 75

dummyhead dummyhead
IGNITION SYSTEM
ENGINE STOP SWITCH INSPECTION
Remove the engine stop switch connector (1) from the
engine wire harness.
Check the continuity between the terminals at each
switch position.
Switch position
If the correct continuity is not obtained, replace the
engine stop switch (page 8-6).
OIL ALERT UNIT INSPECTION
Remove the Oil Alert unit (page 8-7).
Check the continuity between the terminals, and Oil
Alert unit body.
(–)
8-10
Continuity
ON
OFF
(+)
Bl (1) Y (2)
Bl (1) – 0.5 – 10
Y (2) 0.5 – 10 –
Body (3)
No
Yes
Unit: kΩ
Body (3)
–
(1)
WB20XT2•WB30XT2
(1)
(2) (3)