Table of Contents
Advertisement
Roller Axle Assembly
After the initial run of 5-10 hours check Roller Axle
Assemblies to insure that wheels are tight to one another.
Clamp Tightening
Tighten the Clamp bolts evenly to achieve equal spacing
between clamp section. Torque to 75 ft/lbs. Thereafter
check assemblies every 50-100 hours.
See Figure 4-5.
F-661R4
If not, slide wheels tight together and adjust Axle Clamps.
Thereafter check Assemblies every 50-100 hours.
Figure 4-4: Roller Axle Assembly
Figure 4-5: Clamp Tightening
MAINTENANCE
4-7
Advertisement
Table of Contents
