Cd-Rom Front Panel And Status Displays; Drive Status Light Indications - HP 3000 Series Handbook

For HP Internal Use Only
CD-ROM Front Panel and Status Displays
Figure 1-14 shows the CD-ROM controls and indicators.
(6)
l
\
I
II
~
I
I
l
~
.._____
-
Figure 1-14. CD-ROM Drive Front Panel
1. Headphone Jack
2. Volume Control Knob
3. Drive Status Light
4. CD-ROM Eject Button
1
5. Door (CD-ROM Caddy Loading
Slot)
6. Emergency Eject Access
2
1
Ejects a CD-ROM within 5 seconds; will not function if there is
no power or if a software application has disabled operations
2
To eject a CD-ROM when drive power is off, remove screw and
insert the end of a paper clip into this hole.
Table 1-10 shows drive status light indications during normal operation and fault conditions.
Table 1-10. Drive Status Light Indications
Status
Explanation
ON No CD-ROM detected, CD-ROM insertion error detected, or no CD-ROM is
in the caddy.
OFF Drive power is off, self-test passed, or no activity with the host.
FLASHING Activity with the host.
Product Information 1-21