Installing A Cd-Rom, Tape Or Zip Drive In A Front Shelf - HP Vectra VE5 4 User Manual

WARNING

Installing a CD-ROM, Tape or Zip Drive in a Front Shelf

To avoid electric shock and harm to your eyes by laser light, do not
open the laser module. The laser module should be serviced by service
personnel only. Do not attempt to make any adjustment to the laser
unit. Refer to the label on the CD-ROM drive for power requirements
and wavelength. This product is a class 1 laser product.
The PC has an integrated Enhanced IDE controller which supports up
to four IDE devices. Removable media IDE devices, such as CD-ROM
drives, tape drives and Zip drives, require front access. You can install a
removable media IDE drive in the bottom front shelf.
Refer to the drive's manual to see if you must set jumpers or if there is
a special installation procedure to follow.
1 Disconnect the computer's power supply cord and any connection to
a telecommunications network.
2 Remove the computer's cover.
3 Press the two retaining clips (indicated by
PC) of the front drive unit inward and slide the unit forward about
halfway.
4 Remove any data and power cables connected to the rear of the
devices in the front drive unit. (Most models have a CD-ROM drive.)
2 How to Install Accessories In Your PC
Installing Mass Storage Devices
on the label on your
English 35