Hp-Ux Isl Boot Codes; System Initialization Codes; Mpe/Ix System Initialization Codes; Hp-Ux System Initialization Codes - HP 3000 Series Handbook

For HP Internal Use Only
HP-UX ISL Boot Codes
Table 5-33. HP-UX ISL Boot Codes
Display Description
CBOO
Transfer-of control initiated by the firmware (also see the D*** codes)
I
CECO
I
Hpuxboot has been loaded a_qd initialization begun (realmain() has been entered)
CEDO H puxboot has entered main()
CED2
I
Hpuxboot is about to configure the I/0 system
CED4
H puxboot is about to mount the root file system
CEDA Hpuxboot is about to list the contents of a directory
CEDB H puxboot is about to load the kernel into memory
CEDC Hpuxboot is about to start a copy operation
CEDD
Hpuxboot is about to stop (return to rdb)
CEDE Hpuxboot is about to return to ISL
CEDF
H puxboot is about to launch the kernel
System Initialization Codes
Table 5-34. MPE/iX System Initialization Codes
Display Description
CFOO
Entering launch
CF02
Mapped system state
CF04 Allocating memory
CF08
Backing out into Genesis
CFOA
Entering Genesis
CF30 Initializing Genesis completed
CF40 Initializing resident kernel completed
CF50 Initializing non-resident kernel completed
CF60 CM SL binding completed
CF70 Configuring system I/0 completed
CF80 System volume initialized and mounted
CF90 Initializing CM OS completed
Table 5-35. HP-UX System Initialization Codes
Display
Description
CEEO
Kernel was loaded and initialization has begun (realmain() was entered)
CEFO
Kernel has entered main()
CEF2
Kernel is about to configure the I/0 system
CEF4
Kernel is about to mount the root file system
CEF6 Kernel is about to set up the page-out daemon
CEF8
Kernel is about to start the init process
Troubleshooting 5-37