Hp-Ux Os Display Codes; Hp-Ux System Shutdown Codes - HP 3000 Series Handbook

For HP Internal Use Only
HP-UX OS Display Codes
Table 5-36. HP-UX System Panic Codes
Display
Description
BOOO Kernel panic
B009 Panic dump completed (disks not fully synchronized)
BOOA Panic dump completed (disks fully synchronized)
Table 5-37. HP-UX System Shutdown Codes
Display
Description
DOOO Shutdown begun (boot() has been entered)
D400
Shutdown in progress (returned from update(), about to wait for buffers to be
flushed
D600
Shutdown in progress (busy-wait after update() has completed
D900
Shutdown completed (disks not fully synchronized)
DAOO Shutdown completed (disks fully synchronized)
D004 Transfer-of-control core dump begun
D904
TOC dump completed (disks not synchronized)
DOlO
High-priority machine-check core dump begun
D910
HPMC dump completed (disks not synchronized)
Table 5-38. HP-UX System Run Codes
Display
Description
FXlF
System running. An F in the first and fourth digits indicates the system is
running normally. The second digit (X) is updated every 5 seconds with the
length of the run queue at that time (an instantaneous reading, NOT an
average). It indicates the number of processes. Loads higher than 9 display as A.
The third digit indicates the number of processors. In HP 9000 EX5 systems, it is
always set to 1.
5-38 Troubleshooting