20
Final placement of shipping split (Not allowed for marine versions)
Working Order of the Mechanical Installation
Mechanical Installation
The cabinets can be moved to their final position
by using an iron bar and a piece of wood at the
bottom edge of the cabinet. Take care and place
the piece of wood properly to prevent damage
the cabinet frame.
① Fasten the first shipping split to the floor with
fastening clamps or through the holes inside the
cabinet. See section
to the
Floor. In marine versions, fasten the first
shipping split to the floor and roof/wall as
described in section
Versions).
Note:
Any height adjustment of the cabinets must be
done before fastening the cabinets together.
Height adjustment can be done by using metal
shims between the bottom frame and floor.
3ADW000352R0101 DCS800-A Installation Manual e a
Fastening the Shipping Split
Vibration Dampers (Marine