Routing the Cables
The cables that are sources of interference have to be separated from the cables
that are sensitive to interference, thus follows:
Distances between different cable types
1. Route the motor cables (DC) away from all other cables.
2. It is recommended that the
be installed on separate trays.
3. Motor cables of several drives can be run in parallel on the same tray next to
each other.
Routing of mains-, motor- and control cables
4. Separate 24 VDC and 115 / 230 VAC control cables.
−
mains cables (AC),
−
motor cables (DC) and
−
control cables
3ADW000352R0101 DCS800-A Installation Manual e a
59
Control cables
Mains / motor cables
Electrical Installation