52
Cable Connections
WARNING!
Make sure that the DCS800-A Enclosed Converter is disconnected from the mains
network during installation and that the capacitors of the line filters are discharged.
Mains Cable Connection
This section describes the mains connections of the DCS800-A enclosed
converters.
The N conductor is not usually used although it is visible in the following diagrams.
Low Power Supply
Low current (< 300 A) cable connection when one cable is sufficient (see
current
Low-current connection
High Power Supply
Busbar connection
High current (> 300 A) busbar connection (see
High-current busbar connection
Electrical Installation
connection).
3ADW000352R0101 DCS800-A Installation Manual e a
High-current busbar
connection).
Low-