ABB DCS800 Series Installation Manual page 37

1. Fasten the front post of the joining section with six distance bolts to the front
frame post of the next cabinet.
2. 200 mm wide joining cabinet: Remove the intermediate plate, hiding the back
posts in the joining section.
Busbar joining cabinet
3. Fasten the back post of the joining cabinet with five screws (below the
horizontal busbar joining part) to the post of the next cabinet.
4. Remount the intermediate plate and the partitioning plate(s) in the upper part
after connecting the AC busbars.
3ADW000352R0101 DCS800-A Installation Manual e a
Partitioning
plate
Intermediate plate Back posts accessible
Mechanical Installation
37