Table of Contents
Advertisement
Copyright © 2017, Juniper Networks, Inc.
Figure 4: Removing the Rear-Mounting Brackets
Install the cable management brackets on each side of the front of the chassis, and
4.
secure each bracket with screws at the bottom and top of the bracket (see
Figure 5 on page
7).
Figure 5: Installing the Cable Management Brackets
With one person on each side, hold on to the bottom of the chassis and carefully lift
5.
it so that the mounting brackets contact the rack rails.
Carefully slide the router onto the mounting brackets until the front-mounting brackets
6.
attached to the chassis contact the rack rails (see
brackets ensure that the holes in the front-mounting brackets attached to the chassis
align with the holes in the rack rails.
Figure 6: Installing the Router in a Four-Post Rack
Step 2: Install the MX10003 Chassis in the Rack
Figure 6 on page
7). The mounting
7
Advertisement
Table of Contents
