Siemens SIJECT 16i Operation Manual page 10

Introduction
Screen structure
of manual
operating keys
1-4
The screen structure here is relative simple in comparison with hot key
screen structure. Most of them have only one level, and the screens of
core 1 in/out and core2 in/out have the second level, that is, they are used
for core 3 function.
The parameters like position, pressure, flow, delay time, counter and mode
selection can be set in these screens.
Table 1-3 Screen structure of manual operating keys
Screen 1
Mld Clo/Opn
Screen 1
Eject
Screen 1
Carriage
Screen 1
Injection
Screen 1
Charging
Screen 1 Screen 2
Core 1 Core 3
Screen 1 Screen 2
Core 2 Core 3
Screen 1
Air blow
Screen 1
Mold adjust
SIJECT 16i Operation Manual