Rcm - Sprayer Home Page Features - Raven RCM-Sprayer Hawkeye 2 Calibration And Operation Manual

CHAPTER 6

RCM - SPRAYER HOME PAGE FEATURES

FIGURE 2. Home Page Displays
Tabs
Readouts
Operation/
Performance
Display Data
Depending upon the mode and system options, the following display areas, information prompts, and features
may be accessible via the RCM - Sprayer home page:
TABS
Tab views are available on the RCM - Sprayer home page. Tabs allow the
operator to quickly toggle between different information displays and user
configurable readouts during field operations.
The UT offers tabs for each product controlled by the RCM - Sprayer system
as well as a tab to assist with monitoring system pressure information.
NOTE: Review the Readout Descriptions section on page 29 for additional assistance with the available
readouts.
STATUS AND CONTROL INPUTS
The upper, right corner of the Home page provides the operator with
access to the following important status displays and system control
features:
(1) Actual Rate/Pressure. Depending upon the tab selected, the
actual rate or actual pressure is displayed in this area.
(2) Target Rate/Pressure. Depending upon the tab selected, the target rate or target pressure is displayed in this
area. Touch this field to enter a new target rate or pressure as needed during field applications.
NOTE: Target pressure is not available for VP, On/Off, Tiered Nozzle, and Bypass modes.
46
Status and Control
RCM - Sprayer and Hawkeye® 2 Calibration and Operation Manual
Inputs
Product
Pressure
1
3 4
2
5