Labels - Guardian Fall Protection 00342 Instruction Manual

A pre-planned rescue procedure in the case of a fall is required. The rescue plan must be project-specific. The
rescue plan must allow for employees to rescue themselves, or provide an alternative means for their prompt
rescue. Store rescue equipment in an easily accessible and clearly marked area.
Training of Authorized Persons to correctly erect, disassemble, inspect, maintain, store, and use equipment
must be provided by a Competent Person. Training must include the ability to recognize fall hazards, minimize
the likelihood of fall hazards, and the correct use of personal fall arrest systems.
NEVER use fall protection equipment of any kind to hang, lift, support, or hoist tools or equipment, unless
explicitly certified for such use.
Equipment subjected to forces of fall arrest must immediately be removed from use.
Age, fitness, and health conditions can seriously affect the worker should a fall occur. Consult a doctor if there
is any reason to doubt a user's ability to withstand and safely absorb fall arrest forces or perform set-up of
equipment. Pregnant women and minors must not use this equipment.
Physical harm may still occur even if fall safety equipment functions correctly. Sustained post-fall suspension
may result in serious injury or death. Use trauma relief straps to reduce the effects of suspension trauma.

Labels

Skyhook Anchor
Part #: 00342
DOM:
Serial #:
Compatible
roof pitch: Flat - 12/12
Materials: Powder-coated steel.
90050 (Rev. C)
www.guardianfall.com
User must inspect prior to EACH use. Competent Person must complete
formal inspection every 12 months. Competent Person to inspect and initial.
Date of First Use: __________________. Product lifetime is indefinite as
long as equipment passes pre-use and Competent Person inspections.
YR
20____
20____
20____
20____
20____
7
Distributed by Engineered Fall Protection | Sales@EngineeredFallProtection.com | (314) 492-4422 | www.EngineeredFallProtection.com
Prior to use, read and understand all instructions provided with equipment.
Compliant with OSHA 1910, OSHA 1926 Subpart M, ANSI A10.32-2012, and
ANSI Z359.18-2017* regulations. *Depending on application. Refer to instructions for
more details. Type A anchorage connector.
5,000 lb. MBS (minimum breaking strength).
Capacity range: 130-420 lbs. (including all equipment)
Minimum service temperature: -30° F.
Only make compatible connections. Refer to instructions.
All fasteners, equipment, and connections must be selected and deemed compatible
with the Skyhook Anchor by a Competent Person. All fastener holes MUST be filled.
! WARNING
6305 St. 231st St., Kent, WA 98032
J F M A M J
Maximum 1 connection per anchor.
Avoid contact with all hazards, including, but not limited to,
sharp edges, electricity, corrosion, and high heat.
J A S O N D
1-800-466-6385
85340 (Rev. A)