Related Manuals for Guardian Fall Protection Snappy Anchor 00710
Summary of Contents for Guardian Fall Protection Snappy Anchor 00710
-
Page 1: Table Of Contents
Product Name: Snappy Anchor Part #: 00710; 00711; 00715-TV Instruction Manual Do not throw away these instructions! Read and understand these instructions before using equipment! Introduction Applicable Safety Standards Worker Classifications Product Specific Applications Limitations Components and Specifications Installation and Use Maintenance, Cleaning, and Storage Inspection Inspection Log... -
Page 2: Introduction
Introduction Thank you for purchasing a Guardian Fall Protection Snappy Anchor. This manual must be read and understood in its entirety, and used as part of an employee training program as required by OSHA or any applicable state agency. This and any other included instructions must be made available to the user of the equipment. The user must understand how to safely and effectively use the Snappy Anchor, and all fall safety equipment used in combination with the Snappy Anchor. -
Page 3: Product Specific Applications
Product Specific Applications Use of equipment in unintended applications may result in serious WARNING injury or death. Maximum 1 attachment per connection point. Personal Fall Arrest: Snappy Anchor may be used to support a MAXIMUM 1 PFAS for use in Fall Arrest applications. -
Page 4: Components And Specifications
Connector Connector closed and to integral locked to lanyard. D-ring. Two or more Connector snap hooks or directly to carabiners webbing. connected to each other. Application Two connectors that places to same load on gate. D-ring. Incompatible or irregular Connector directly to application, horizontal... -
Page 5: Installation And Use
Installation and Use MINIMUM substrate thickness requirements: Compatible roof pitch: • Wood: 3½” (must include truss or other • Installed over roof peak: 0/12 - 12/12. equivalent structural support beam). Do not • Installed on flat surface: 0/12 - vertical/sheer. install on any other substrate material. -
Page 6: Maintenance, Cleaning, And Storage
Maintenance, Cleaning, and Storage If Snappy Anchor fails inspection in any way, immediately remove it from service, and contact Guardian to inquire about its return or repair. Field serviceability testing is not required, and should not be done by the end user. -
Page 7: Safety Information
Safety Information Failure to understand and comply with safety regulations may result in serious injury or death. Regulations included herein are not all-inclusive, WARNING are for reference only, and are not intended to replace a Competent Person’s judgment or knowledge of federal or state standards. Do not alter equipment. -
Page 8: Labels
Labels Snappy Anchor WARNING Part #: 00710; 00711; 00715-TV Prior to use, read and understand all IMMEDIATELY remove from use if manufacturer’s instructions provided exposed to forces of fall arrest. with equipment at time of shipment NEVER for use with horizontal lifelines. from manufacturer.
Need help?
Do you have a question about the Snappy Anchor 00710 and is the answer not in the manual?
Questions and answers