Configuration / Address Space; Configuration Of The Tm Npu - Siemens SIMATIC S7-1500 Manual

Configuration / address space

5.1

Configuration of the TM NPU

The TM NPU can be configured with STEP 7 (TIA Portal) as of V17 with HSP 0379 and GSDML:
• Central deployment
– S7-1500 CPUs: as of V2.5
• Distributed deployment
– Interface Module IM 155-5 PN HF (6ES7 155-5AA00-0AC0): V3.0 or higher
– Interface Module IM 155-5 PN ST (6ES7 155-5AA01-0AB0): as of V4.1
Configuring the TM NPU
You specify the properties of the module while configuring the module with STEP 7:
• Start address of the inputs
• Start address of the outputs
• Enable/disable load voltage diagnostics
• Enable/disable USB interface
– Enable/disable USB camera
• Enable/disable Gigabit Ethernet interface
– Enable/disable GigE Vision
– Enable/disable FTP client
– Enable/disable debug mode via web server
Hardware Support Packages (HSP)
You integrate firmware version V2.0 of the module (6ES7 556-1AA00-0AB0) using HSP 0379.
The Hardware Support Packages (HSP) are available for download on the Internet
(https://support.industry.siemens.com/cs/ww/en/view/72341852).
Alternatively, you can access this download from the menu bar of STEP 7 (TIA Portal):
Options > Support Packages > Download from the Internet.
GSD file
The respective GSD file for the ET 200MP distributed I/O system is available for download on
the Internet:
• PROFINET GSD files: I/O - ET 200MP
(http://support.automation.siemens.com/WW/view/en/68189683)
26
Technology Module TM NPU
Equipment Manual, 07/2023, A5E46384784-AC
5