Festo Checkbox Compact CHB-C-C Manual page 95

6. Testing parts
Festo P.BE-CB-COMP-EN en 0211a
Setting according to test part deviation:
S
Select sample parts which are suitable as reference
S
for good or bad parts. The recognition-specific fea-
tures should lie where possible in the border range
good/bad.
Vary the tolerance so that the following test part devi-
S
ation is shown when the borderline sample parts are
scanned.
‹ 100 Borderline sample part "Good"
› 100 Borderline sample part "Bad"
6-7