Festo Checkbox Compact CHB-C-C Manual page 82

5. Teaching parts
5-4
Sample parts
Provide suitable sample parts for every parts type in accord-
ance with the following specifications:
– The sample parts should show all the characteristics
which a part classified as "Good" possesses.
– Use different sample parts with a usual scatter of fea-
tures. With the scatter of sample parts, you can determine
the extent to which test parts classified as "Good" may
deviate from each other.
If you are using the CheckKon/CheckOpti software packages,
please note the instructions in the software manuals on how
to prepare the teach procedure.
Festo P.BE-CB-COMP-EN en 0211a