Download Print this page

Instructions For Proper Maintenance - Yardistry YM11909 Installation And Operating Instructions Manual

Pavilion

Advertisement

Your Yardistry structure is designed and constructed of quality materials. As with all outdoor
products it will weather and wear. To maximize the enjoyment, safety and life of your structure
it is important that you, the owner, properly maintain it.
HARDWARE:
Check metal parts for rust. If found, sand and repaint using a non-lead paint complying
with 16 CFR 1303.
Inspect and tighten all hardware after completion of assembly; after first month of use; and
then annually. Do not over-tighten as to cause crushing and splintering of wood.
Check for sharp edges or protruding screw threads, add washers if required.
WOOD PARTS:
Applying a water repellent or stain (water-based) on a yearly basis is important
maintenance to maintain maximum life and performance of the product.
Check all wood members for deterioration, structural damage and splintering. Sand down
splinters and replace deteriorated wood members. As with all wood, some checking and
small cracks in grain is normal
Some gapping may occur at some wood connections.
Tools Required:
Tape Measure
Carpenters Level
Standard or Cordless Drill
7/16", 1/2" & 9/16" Wrench
7/16", 1/2" & 9/16" Socket
Symbols:
Throughout these instructions symbols are provided in the top, right-hand corner of the page.
Use Help, where this is shown, 2, 3 or 4
people are required to safely complete
this step. To avoid injury or damage to the
assembly make sure to get some help.
Pre-drill a pilot hole before fastening
screw or lag to prevent splitting of wood.
If you dispose of your Yardistry structure: Please disassemble and dispose of your unit
so that it does not create any unreasonable hazards at the time it is discarded. Be sure to
follow your local waste ordinances.

Instructions for Proper Maintenance

Assembly Guides
8' Step Ladder
Safety Glasses
Adult Helper
Safety Gloves
Hard Hat
6' Step Ladder x 2
Square
Ratchet
Use a measuring tape to assure proper
location
Check that assembly is square before
tightening bolts
4
4
support@yardistrystructures.com
support@yardistrystructures.com

Advertisement

loading