Step 8: Attach Roof Panels
Part 2
E: Place one Roof Edge Left and one Roof Edge Right on the bottom of one Roof Panel Frame so they meet
tight and the ends are flush with the outside ends of (839) Strap Short and (840) Strap Long. Predrill the end
holes on both Roof Edge Right and Roof Edge Left with a 1/8" drill bit then attach both Roof Edges with 15 #8 x
1" Hex Roofing Screws. (F8.4)
F8.4
Strap
Components
2 x Roof Edge Left
2 x Roof Edge Right
26
#8 x 1" Hex
Roofing Screws
x 15
Roof
Edge Left
Pre-drill for
this screw
Hardware
30 x #8 x 1" Hex Roofing Screw
Pre-drill for
this screw
Roof Edge
Right
Tight
support@yardistrystructures.com