Advertisement
Step 7: Roof Panel Frame
Part 3
F: Make sure frame is square. Measurements to be as shown in F7.6.
G: In the centre middle gap between (831) Rafters place one (838) Rafter Brace flush to the top of each (837)
Rafter Top. Use two 1/4 x 4-3/4" Hex Bolts as a guide to line up the bolt holes. Attach (838) Rafter Braces to (837)
Rafter Tops with eight #8 x 1-3/4" Wood Screws. Remove each Hex Bolt as they will be used in a later step and
not installed here. (F7.6 and F7.7)
H: Repeat Steps A - G to create a second Roof Panel Frame.
F7.7
S15-Wood Screw #8 x 1 3/4
(837)
F7.6
Rafter Top
Wood Parts
2 x (838) Rafter Brace
1/4 x 4-3/4"
Hex Bolt
(To be used as
guides only in
this step)
(831)
Rafter
(838) Rafter
Brace
132-1/2"
3.37 m
(837) Rafter Top
(837)
Rafter Top
(831)
Rafter
22
(838) Rafter
Brace
Flush
#8 x 1-3/4
Wood Screws
Hardware
16 x #8 x 1-3/4" Wood Screw
1/4 x 4-3/4"
Hex Bolt
(To be used as
guides only in
this step)
(831)
Rafter
support@yardistrystructures.com
Advertisement
