Advertisement
Quick Links
Installation Manual -R003
Yardistry Ltd. - North America
Toll Free Customer Support: 1.888.509.4382
info@yardistrystructures.com
www.yardistrystructures.com
Yardistry / Selwood Products - Europe
Customer Support: +44 1284 852569
parts@selwoodproducts.com
www.selwoodproducts.com
Entryway Kit
Revised 02/08/2011
1
(1.18m)
(0.69m)
(1.00m)
(0.51m)
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for Yardistry R003
Summary of Contents for Yardistry R003
- Page 1 Installation Manual -R003 Entryway Kit Revised 02/08/2011 (1.18m) Yardistry Ltd. - North America Toll Free Customer Support: 1.888.509.4382 info@yardistrystructures.com www.yardistrystructures.com (0.69m) (0.51m) Yardistry / Selwood Products - Europe Customer Support: +44 1284 852569 parts@selwoodproducts.com www.selwoodproducts.com (1.00m)
-
Page 2: Important Safety Notice
Wood is NOT fl ame retardant and will burn. Grills, fi re pits and chimneys are a fi re hazard if placed too close to a Yardistry structure. Consult user’s manual of the grill, fi re pit or chimney for safe distances from combustible materials. -
Page 3: Material List
Material List 2" x 4" 1½" x 3½" 5/4" x 3" 1" x 2½" Y50113-029 (2) 2 x 4 x 80" 2 x 4 x 41” Y50113-031 (2) 2 x 4 x 41 " 2 x 4 x 25” Y50113-030 (6) 5/4 x 3 x 54¼"... - Page 4 Material List (2) One High X Topper *Optional- May Not be Included (4) 2 x 4 x 12” Gusset (2) Three High X Panel (34) #8 x 3½" (8) #8 x 3” Wood Screw (4) 4x4 Post...
- Page 5 Step 1- Assemble Panels 1. Remove the metal connectors on both sides of PX3 - Three High X Panel. Reattach the metal connectors to PX3 by securing the bottom two holes of the metal connectors to the top two holes on PX3 so that the metal connectors stick out from the top.
- Page 6 Step 2- Attach Panel Clips to posts Fig. 1 Front View 1. On a fl at surface place P- 4x4 Post on its side and position Panel Clips in locations indicated in Figure 1. Ensure Panel Clips are oriented as shown in Diagrams! 2.
- Page 7 Step 3 -Attach Panels to Posts 1. Place panel assemblies on posts as shown (Fig.1) allowing a 4” gap between the bottom of the post and the bottom edge of the bottom rail on the panel assembly. Note: This is best achieved by laying a 4x4 post on the ground.
- Page 8 fl at and level surface. It is recommended the structure be secured to existing stone, concrete or deck with the Yardistry Post Base (YM21016) or equivalent hardware. 2. Install Post Top Connectors with S6- 1 1/2” Pan Head Screws provided. (Fig. 2) Ensure the direction of the Post Top Connector is the same direction as indicated by the arrows in fi...
- Page 9 Step 5- Assemble Roof 1. Attach two A- 2 x 4 x 41” Beams to Post Top Connectors with WH-7/16" Hex Bolt as shown in Fig. 1 and 1A. 2. Attach two B-2 x 4 x 25” Beams to Post Top Connectors with WH-7/16" Hex Bolt as shown in Fig. 1 and 1A. Drill 1/4”...
- Page 10 Step 6 (Optional)- Install Gussets * Installing the Gussets will strengthen your project. Gussets are not essential to the overall project and are only suggested if you experience wobble. 1. Attach four G-2 x 4 x 12” Gussets to 4x4 Post and A- 2 x 4 x 41” Beams with S3- #8x 3” Wood Screws as indicated by the arrows in fi...
Need help?
Do you have a question about the R003 and is the answer not in the manual?
Questions and answers