Advertisement
Step 9: Attach Roof Panels to Frame
Part 1
A: With four assemblers lift one Roof Panel Frame up and over Post and Beam Frame Assembly so the notches
in (831) Rafters rest on Side Beam Assembly and (837) Rafter Tops are flush to the outside of each (846) Gable
Upright Assembly. One assembler must remain on a ladder to hold Roof Panel Frame in place until secured.
(F9.1, F9.2 and F9.3)
B: Lift the second Roof Panel Frame so the notches in (831) Rafters rest on Side Beam Assembly and (837)
Rafter Tops are flush to the outside of each (846) Gable Upright Assembly and is tight to the first Roof Panel
Frame. (F9.1, F9.2 and F9.3)
(837) Rafter Top
F9.3
Flush
Roof Panel
Frame
(831)
Rafter
Flush and
Tight
(846) Gable
Upright
Assembly
Side Beam
Assembly
One assembler to support Roof
Panel Frames at all times until
secure
29
F9.2
(831)
Rafter
F9.1
(837) Rafter
Top
(846) Gable
Upright
Assembly
x 3
Notch rests on Side
Beam Assembly
Roof Panel
Frame
(831)
Rafter
Side Beam
Assembly
support@yardistrystructures.com
Advertisement
