Advertisement
Step 4: Side Beam Assembly
Part 1
A: Fit two (836) Side Beam Outsides together so the middle pilot holes are at the bottom for both. Connect using
two 5/16 x 1-1/4" Hex Bolts (with 5/16" lock washer, 1/4-5/16" large washer and 5/16" t-nut) as shown in F4.1.
B: Connect one (835) Side Beam Ends to each end of one (834) Side Inside Beam using two 5/16 x 1-1/4" Hex
Bolts (with 5/16" lock washer, 1/4-5/16" large washer and 5/16" t-nut) per end as shown in F4.2.
C: Repeat Steps A and B one more time to make two Outside Beam Assemblies and two Inside Beam Assemblies.
5/16 x 1-1/4"
Hex Bolt
(835) Side
Beam Ends
Wood Parts
4 x (836) Side Beam Outside
2 x (834) Side Beam Inside
4 x (835) Side Beam Ends
5/16 x 1-1/4"
Hex Bolt
(834) Side
Beam Inside
Tight
Notice holes
on bottom of
both boards
F4.2
(835) Side
Beam Ends
5/16"
T-nut
1/4 - 5/16"
Large Washer
(836) Side
Beam Outside
12 x 5/16 x 1-1/4" Hex Bolt
15
(836) Side
Beam Outside
5/16 x 1-1/4"
Hex Bolt
5/16" Lock
Washer
Hardware
(5/16" lock washer, 1/4-5/16" large washer, 5/16" t-nut)
support@yardistrystructures.com
F4.1
Advertisement
