Advertisement
Step 6: Attach Gussets
Note: The bevelled ends on each
gusset should always face away from
the wood it is attaching to.
A: Make sure the assembly is still square
and level then facing one Side Beam
Assembly place one (842) Gusset Right
on the right hand side so the top fits
tight to the Side Beam Assembly and the
bottom fits tight to the Post Assembly.
Attach gusset to Side Beam Assembly
with two 5/16 x 3-1/4" Hex Bolts (with
5/16" lock washer, 1/4-5/16" large washer
and 5/16" t-nut). Pre-drill with a 1/8" drill
bit then attach gusset to Post Assembly
with three 1/4 x 1-15/16" Lag Screws
(with 1/4-5/16" large washer). Repeat for
the left hand side with one (843) Gusset
Left. (F6.1 and F6.2)
B: Repeat Step A for Gable Beam
Assembly using two 5/16 x 2" Hex Bolts
(with 5/16" lock washer, 1/4-5/16" large
washer and 5/16" t-nut) to attach gussets
to Gable Beam Assembly. (F6.1 and
F6.2)
C: Repeat Steps A and B so all 8 gussets
are attached. (F6.1 and F6.2)
Wood Parts
4 x (842) Gusset Right
4 x (843) Gusset Left
F6.1
Side Beam
Assembly
(842)
Gusset
Right
(843)
Gusset
Left
Gable Beam
Assembly
5/16 x 2"
Hex Bolt
(842)
Gusset
Right
1/4 - 1-15/16"
Lag Screw
19
(843)
(842) Gusset
Gusset
Right
Left
Gable Beam
Assembly
(842)
Gusset
Right
F6.2
Side Beam
Assembly
Post
Assembly
Tight
1/4 - 5/16"
Large Washer
Hardware
24 x 1/4 x 1-15-16" Lag Screw (1/4-5/16" large washer)
8 x 5/16 x 3-1/4" Hex Bolt (5/16" lock washer, 1/4-5/16" large
washer, 5/16" t-nut)
8 x 5/16 x 2" Hex Bolt (5/16" lock washer, 1/4-5/16" large washer,
5/16" t-nut)
Gable Beam
Assembly
(843)
Gusset
Left
Side Beam
Assembly
(842) Gusset
Right
(843)
Gusset
Left
5/16"
T-nut
5/16" Lock
Washer
1/4 - 5/16"
5/16 x 3-1/4"
Large Washer
Hex Bolt
(843)
Gusset
Left
1/4 - 1-15/16"
Lag Screw
L10 ---1/4 x 1-15/16 Lag w. N1
Y0618-219
Y50000-842- Gusset Right
Y50000-843 -Gusset Left
support@yardistrystructures.com
Advertisement
