Advertisement
Step 9: Attach Roof Panels to Frame
Part 3
D: Loosely attach each of the centre (831) Rafters to the inside of each Side Beam Assembly with one Rafter
Beam Bracket per (831) Rafter using one 1/4 x 2" Hex Bolt (with two 1/4-5/16" large washer and one 1/4" lock
nut) per bracket. Push up on the centre of the Roof Panels so the notches in (831) Rafters are tight to the Side
Beam Assembly then attach four #10 x 1-1/4" Pan Screws per bracket. Once screws are installed tighten bolts.
(F9.8, F9.9 and F9.10)
F9.9
1/4 - 5/16"
Large Washer
1/4" Lock
Nut
Rafter
Beam
Bracket
#10 x 1-1/4"
Pan Screw x 4
per bracket
Components
8 x Rafter Beam Bracket
F9.8
Side Beam
Assembly
(831)
Rafter
Side Beam
Assembly
1/4 - 5/16"
Large
Washer
(831)
Rafter
1/4 x 2"
Hex Bolt
Side Beam
Assembly
8 x 1/4 x 2" Hex Bolt (1/4-5/16" large washer x 2, 1/4" lock nut)
32 x #10 x 1-1/4" Pan Screw
31
x 3
F9.10
Hardware
support@yardistrystructures.com
Tight
Side Beam
Assembly
Advertisement
