Advertisement
Step 11: Attach Gable Ends
A: On one side of the assembly place two (830) Fascia against the outside (831) Rafters so the peaks meet in
the centre and they are tight and flush to the top and edge of (846) Gable Upright Assembly. Bottom of (830)
Fascia to bottom of (831) Rafter should measure 1" all along each (830) Fascia. Attach with eight #8 x 1-3/4"
Wood Screws per (830) Fascia. (F11.1, F11.2 and F11.3)
B: Repeat for the other side of the assembly.
(830)
Fascia
(846) Gable
Upright
Assembly
F11.2
(830)
Fascia
#8 x 1-3/4" Wood Screws
(8 per Fascia)
Wood Parts
4 x (830) Fascia
(830)
Fascia
Y50000-830 -Fascia
F11.1
Tight
(846) Gable
Upright
Assembly
S15-Wood Screw #8 x 1-3/4
(830)
Fascia
1"
(830)
Fascia
Flush
and Tight
S15-Wood Screw #8 x 1-3/4
32 x #8 x 1-3/4" Wood Screw
34
x 2
F11.3
Side View
(831)
Rafter
Hardware
support@yardistrystructures.com
Advertisement
