Changing General Tab Settings - Wavetronix SmartSensor HD User Manual

SmartSensor HD User Guide
42
•

Changing General tab settings

Setting
Serial Number
Subnet/ID
Description
Location
Figure 45. General tab
Description
Shows the
identification number
assigned to the
sensor by Wavetronix.
Subnet: defaults to
000. ID: defaults to
the last five digits
of the sensor serial
number. No two
sensors should have
the same ID.
Lets you create a
description of the
sensor. Limit of 32
characters.
Lets you enter the
sensor's location.
Limit of 32 characters.
Details
Can't be changed.
Subnet: change if
you want to create
groupings of sensors
ID: generally you
won't need to change
this.
Change this if you
think you'll find it
useful in identifying
the sensor later.
Change this if you
think you'll find it
useful in identifying
the sensor later.