Password-Protecting The Sensor - Wavetronix SmartSensor HD User Manual

Note. If you do
this, you'll have to
enter the password
every time you try
to connect to the
sensor, so only set
a password if you're
sure you need one.
SmartSensor HD User Guide
38
•

Password-protecting the sensor

Figure 39. Setting a password for your sensor
Click on the key icon at the bottom of the connection screen
1
(serial, Internet or virtual). The icon only appears when you're
connected.
Check Enabled to confirm you want to password-protect the
2
sensor.
Enter the new password into the Password field.
3
Click OK.
4
If you forget your password
Figure 40. Forgotten Password window
When you're prompted to enter the password, you'll see a link you
can click if you've forgotten the password you chose. It tells you to
contact Wavetronix technical support and what information to give
them.