Table of Contents
Advertisement
FC7x0
Dismantling and disposal
22 Dismantling and disposal
22.1 Decontamination and return shipment
Use of fluids that are a health hazard may result in caustic burns or
DANGER
poisoning
▶ When removing the flow meter, avoid touching the fluid and breathing gas residues
▶ Wear protective clothing and a breathing mask.
Note the following items before returning the shipment:
▶
▶
▶
22.2 Disposal
Prior to disposal of the flow meter, please take note of the following:
▶
▶
Special disposal required
The device includes components that require special disposal.
▶ Dispose of the device properly and environmentally through a local waste disposal
176 / 180
left in the sensor.
Clean flow meter thoroughly. No harmful chemicals must remain in or on the flow
meter. Siemens only accepts completely drained and cleaned flow meters.
The form "Decontamination Declaration" must be filled in completely and sent to
Siemens along with the flow meter.
Package flow meter in a shockproof manner for transport. Use original packaging, if
possible.
Comply with the applicable national regulations in the event of disposal or recycling.
Do not dismantle flow meter until all fluid residues have been removed and dispose
the parts individually.
Devices described in this manual should be recycled. They may not be
disposed of in the municipal waste disposal services according to the
Directive 2012/19/EC on waste electronic and electrical equipment
(WEEE). Devices can be returned to the supplier within the EC and
UK, or to a locally approved disposal service for eco-friendly recycling.
Observe the specific regulations valid in your country. Further
information about devices containing batteries can be found at:
Information about battery / product return (WEEE)
support.industry.siemens.com/cs/document/109479891/)
contractor.
A5E52748387-AA, 2023/09
Decontamination and return shipment
(https://
Advertisement
Table of Contents
