Pc Requirements - Dataman 448PRO2AP User Manual

Before installing and using your programmer, please carefully check that your package
includes all next mentioned parts. If you find any discrepancy with respective parts list and/or if
any of these items are damaged, please contact your distributor immediately.

PC requirements

Minimal PC requirements
2x DATAMAN 448PRO2AP
DATAMAN 448PRO2AP
DATAMAN 48PRO2AP
1024 x 768 is minimal monitor resolution.
The "Minimal PC requirements" mean, the device programmer and SW will run at these
conditions, but not with fully enjoyable experience
Recommended PC requirements
2x DATAMAN 448PRO2AP
DATAMAN 448PRO2AP
DATAMAN 48PRO2AP
We recommended using higher monitor resolution as 1024 x 768.
*1 – or better
These PC requirements are valid for 3.38 version of PG4UW (issued 2.2018) and above.
We still recommend Windows 7 because of unexpected restarts after automatic updates of the
Windows 10. If you are fine with this, you can use Windows 10.
If two programmers are to be connected to a single PC, then we strongly recommend
connecting each programmer to separate USB 2.0 High speed controller (USB EHCI). For
more information see "Hardware setup" chapter.
Free disk space requirement depends also on used IC device size and number of attached
programming sites. For large devices the required free space on disk will be approximately
1000MB + 2x Device size x number of programming sites attached to this PC.
XP C2D
XP C2D
XP C2D
*1
Core i5
Win 7
*1
Core i3
Win 7
*1
Core i3
Win 7
*2 – or more
8
1000 500
1000 500
1000 500
*2 *2
4000 2000
*2 *2
2000 1000 
*2 *2
2000 1000




