Dataman 448PRO2AP User Manual page 101

Note: If firewall is installed on system, firewall can display warning message when remote
control Server or Client is starting. When firewall is showing warning with question asking to
allow or deny network access for remote Server or Client, please select 'Allow' option,
otherwise remote control will not work. Of course you can specify in firewall options more strict
rights to allow remote Server/Client access on specified address and port only.
For more information about remote control of PG4UW and demonstration remote control
applications, please see the application note remotemanual.pdf placed in subdirectory
\RemoteCtrl which is in the directory, where PG4UW is installed. Manual for remote control is
available also from Windows Start / Programs menu link to Remote manual, created during
PG4UW installation.
Save options
Page allows you to select the program options saving when exiting program. Three options are
available here:
Don't save
Auto save
Prompt for save
Other
Page Other allows user to manage other program settings.
Panel Application priority allows user to set the priority of the program. Priority settings can
affect performance of programmer (device programming time), especially if there are running
more demanding applications in the system. Please note that setting application priority level
to Low can significantly slow down the program.
In the panel Tool buttons, hint display options on toolbar buttons in main program window can
be modified. In the panel Start-up directory can be selected mode of selecting directory when
program starts. Default start-up directory means directory, from which program is called.
Directory in which program was lastly ended means the last current directory when
program was lastly ended. This directory assumes the first directory from directory history list.
Colors of the work result LEDs of programmer:
Standard color scheme (ERROR=red, BUSY=yellow)
Former color scheme (ERROR=yellow, BUSY=red)
Note: These settings are available only for newer types of programmers. If you can't see
mentioned settings in menu, or menu is not enabled for editing, your programmer doesn't
support LED color scheme customization.
Colors of the work result indication in the software:
Standard color scheme (ERROR=red, BUSY=yellow)
According to LEDs on the programmer (ERROR=yellow, BUSY=red)
Note: These settings are available only for older types of programmers.
don't save options during quitting program and don't ask for saving
options
save options during quitting program without asking for saving options
program asks user for saving options before quitting program. User can
select to save or not to save options
101
PG4UW