Pg4Uw-The Programmer Software - Dataman 448PRO2AP User Manual

PG4UW-the programmer software

Program pg4uw.exe is common control program for all DATAMAN's programmers. We
guarantee running of these programs under all of above mentioned operating systems without
any problems. Also background operation under Windows is error-free.
Using the programmer software
Run the control program
In Windows environment: double click to icon PG4UW.
After start, control program PG4UW automatically scan all existing ports and search for the
connected any DATAMAN programmer. Program PG4UW is common for all the DATAMAN
programmers, hence program try to find all supported programmers.
Note: When PG4UW is started, program is checked for its integrity. Than the program display
a standard user menu and waits for your instructions.
If the control program cannot communicate with the programmer, an error message appears
on the screen, including error code and description of possible reasons (disconnected
programmer, bad connection, power supply failure, incompatible printer port...). Eliminate the
error source and press any key. If error condition still exists, the program resumes its operation
in the demo mode and access to the programmer is not possible. If you cannot find the cause
of the error, follow the instructions in Troubleshooting section. In addition, the control
program checks communication with programmer prior to any operation with the programmed
device.
The control program delivered by DATAMAN, included on
the CD in your package, is granted to be free from any
viruses at the moment of delivery. To increase their safety
our programs include a special algorithm for detecting
possible virus infections.
44