Dataman 448PRO2AP User Manual page 63

Select device ... / All
This window allows selecting the desired type of the device from all devices supported by
current programmer. Supported devices are displayed in a list box.
Device can be select by double click on a line from list with desired manufacturer name and
device number or by entering manufacturer name and/or device number in a search box (use a
key <Space> as a separation character) and press <Enter> or click OK button.
Press a key <Esc> or click Cancel button at any time to cancel device selection without
affecting the currently selected device.
Selected device is automatically saved to buffer of default devices. This buffer is accessible
with Device / Select from default devices command.
If you wish display additional information about the current device, use button Device info or
an <Ctrl+F1> key. This command provides a size of device, organization, programming
algorithm and a list of programmers (including auxiliary modules), which supported this device.
You can find here package information and other general information about current device too.
Select device ... / Only selected type
This window allows selecting the desired type of the device. At the first - you must select a
device type (e.g. EPROM) and device subtype (e.g. 64Kx8 (27512)), using mouse or cursor
keys. It will cause a list of manufacturers and devices will be displayed.
Device can be select by double click on a line from list with desired manufacturer name and
device number or by entering manufacturer name and/or device number in a search box (use a
key <Space> as a separation character) and press <Enter> or click OK button.
Press a key <Esc> or click Cancel button at any time to cancel device selection without
affecting the currently selected device.
Selected device is automatically saved to buffer of default devices. This buffer is accessible
with Device / Select from default devices command.
If you wish display additional information about the current device, use button Device info or
an <Ctrl+F1> key. This command provides a size of device, organization, programming
algorithm and a list of programmers (including auxiliary modules) that supported this device.
You can find here package information and other general information about current device too.
Select device ... / Only selected manufacturer
This window allows selecting the desired device type by manufacturer. First select a required
manufacturer in Manufacturer box using mouse or cursor keys. It will cause a list of selected
manufacturer devices will be displayed.
Device can be select by double click on a line from list with desired manufacturer name and
device number or by entering device number in a search box (use a key <Space> as a
separation character) and press <Enter> or click OK button.
Press a key <Esc> or click Cancel button at any time to cancel device selection without
affecting the currently selected device.
Selected device is automatically saved to buffer of default devices. This buffer is accessible
with Device / Select from default devices command.
63
PG4UW