Dataman 448PRO2AP User Manual page 77

The typical path can look like this:
C:\Program
Files\DATAMAN_sw\Programmer\Examples\Serialization\fromfile_playlist_example\
You can test the serialization by following steps:
1. start PG4UW
2. you need to have our programmer connected and correctly found in PG4UW
3. select wished device, the best are devices with erasable memory, (not OTP memory)
4. select dialog from menu Device / Device Options / Serialization
5. Set the From-file mode and in the panel From-file mode options select our example
serialization file fromfile_playlist.ser
6. click the OK button to accept the new serialization settings
7. run "Program" device operation
You can see at the serialization indicating labels in the main window of PG4UW and also in
info progress window during device programming and repeating of programming.
Additional operation with used files
This group box contains three types of operation. User can select one of the operations to do
with used serialization data files in Playlist From-file mode. Following operations are available:
 option Do nothing
program does not make any operation with used serialization data files
 option Move used file to specified directory
program moves used serialization data files to user specified directory of used serialization
files
 option Delete used file
program deletes used serialization data files
Directory
This option is available in playlist From-file serialization mode and selected option "Move used
file to specified directory". User can specify target directory, into which used serialization data
files will be moved.
Following error indicators are used in Playlist From-file serialization:
 s/n error #3 serialization data file does not exist
 s/n error #34 used serialization data file can not be deleted (maybe serialization files are
placed on write-protected disk)
 s/n error #35 used serialization data file can not be moved to target directory of used
serialization files (maybe serialization files are placed on write-protected disk, or target
directory does not exist)
Device / Device options / Serialization / Custom generator mode
Custom generator serialization mode provide maximum flexible serialization mode, because
the user have serialization system fully in his hands.
When Custom generator mode of serialization is selected, serial numbers are generated by
user made program "on-the-fly" before each device is programmed in PG4UW or PG4UWMC.
Custom generator mode serialization allows user to generate unique sequence of serial
numbers desired. Serial numbers can be incremented as a linear sequence or completely non-
linear sequence. The user made serial number generator program details are described later
in the following section Custom generator program.
77
PG4UW