Dataman 448PRO2AP User Manual page 118

When Automatically save Job Report file setting is set, no Job Report dialogs appears when
generating Job Report. Newly generated Job Report is saved to file without any dialogs or
messages (if no error occurs while saving to file).
If the checkbox Automatically save Job Report file is unchecked, the PG4UWMC will show
Job Report dialog every time needed.
In the Job Report dialog user can select operation to do with Job Report. If user selects no
operation (Close button), the Job Report will be written to PG4UWMC Log Window only.
Example of typical Job Report dialog is shown bellow:
Automatic YES! Settings
In this mode you just take off the programmed device, then put new device into ZIF socket and
a last operation will be repeated automatically. Program automatically detects an insertion of a
new device and runs last executed operation without pressing any key or button. An insertion
of device into ZIF is displayed on the screen. Repeated operation executing will be canceled
by pressing key <Esc> during waiting for insert/remove a device to/from ZIF.
This feature may not be available for some types of programmers.
118