Dataman 448PRO2AP User Manual page 35

Setup
If USB connector and power cable are connected to rear connectors, total depth of
programmer will be 205mm + length of B type USB connector on USB cable. Total depth of
programmer may be 205mm + 50mm.
If USB connector and power cable are connected to right side connectors, total width of
programmer will be 310mm + length of B type USB connector on USB cable. Total depth of
programmer may be 310mm + 50mm.
Mounting USB cable to case and length of USB connector with cable bending.
For proper connection DC adapter to programmer, arrow on cable connector must be oriented
to arrow on programmer connector.
Arrows on power supply connectors
This connector has locking mechanism, to avoid unwanted disconnection. For disconnecting is
needed pull locking collar on cable connector.
35