Table of Contents
Advertisement
Operators Manual
Figure 6-4
Replacing the Carbon Filter is a simple matter of pulling out the used filter and setting in
the new one. Use only the LWS authorized replacement filter; for part information see
the beginning of this chapter.
The Pre-Filter can be washed, dried, and re-used until it shows signs of wear.
Cleaning the Pre-Filter
The Pre-Filter can be cleaned off with regular soap and water. Ensure that the filter is
dried thoroughly before re-installing it into the Revolution.
Re-Installation of the Filter Tray
With cleaning of the Pre-Filter accomplished, replace the Pre-Filter into the bottom of
the Filter Tray, followed by the Carbon Filter.
54
Carbon Filter
Pre-Filter
FILTR Revolution
Figure 6-5
248083486-1 R2
Advertisement
Table of Contents
