Table of Contents
Advertisement
Operators Manual
Compare View
The FILTR app has the ability to compare data received from different Revolution units.
For this function, more than one unit must be listed in the app., and each selected unit
must have the sensor pack installed to display relevant data.
To select a unit for comparison, press the white Tile Select circle in the bottom
left of the desired Revolution's tile. It will change to contain a check mark.
Select a second Revolution tile for comparison with the first, and the Compare icon at
the bottom of the Main screen will become selectable.
Press the Compare Units icon at the bottom of the Main Screen to bring up the Compare
screen.
As shown below, this screen will list the last measurements from the Sensor Pack for
each of the units selected, along with a colored dot indicating the status of the
measurement relative to the set Alarm Thresholds.
Any unit that is turned off, or has no Sensor Pack
installed, will have the indicator dots grayed out.
Indicator Dots
Green = Measurement within threshold
Orange = Measurement close to limit
Red = Measurement exceeds threshold
As with the regular data indicators, the values displayed in the Compare screen will be
updated every 10 minutes.
32
Relative Humidity
Temperature
PM2.5
VOC
FILTR Revolution
Figure 4-23
248083486-1 R2
Advertisement
Table of Contents
