Table of Contents
Advertisement
FILTR Revolution
5 External Accessories
The Revolution is designed for more than just static placement on a horizontal surface.
With the casters installed in the Pedestal (see Chapter 2) the unit can be easily mobile.
Other external accessories are available that will allow the unit to be mounted to a
standard wall, Structural Insulated Panels (SIPs), or even hung from overhead supports.
The unit also ships with an adapter kit for connecting to 10" ducting, which allows the
unit to intake/exhaust from physically separated locations, or even be entirely removed
from the space that the Revolution is cleaning.
Overview of External Accessories
There are three external accessory kit options that exist for the Revolution unit to
support the operational needs of the installation space:
• Vertical Wall Mount (Including SIPs)
• Horizontal Ceiling Mount
• 10" Ported Duct Adapter Kit
The Wall and Ceiling mounting options involve removal of the units Pedestal and
installation of the mounting hardware.
The Duct Adapter Kit comes with four main pieces: Two Duct adapters and two hose
clamps. The Duct Adapters can be installed on only one or on both ends of the unit. If
the Duct Adapter is installed on the bottom of the unit, one of the mounting kits will
also need to be installed in order to allow the ducting to access the bottom of the unit.
The wall mounting kit comes with four main pieces: Two brackets that anchor to the
wall and two brackets that connect to the top and bottom covers of the unit and enable
the Revolution to hang on the brackets installed on the wall. Associated hardware is also
included.
The ceiling mounting kit comes with two brackets, one each for the top and bottom of
the unit, that enable the unit to be hung from overhead supports using ropes or cabling.
Hardware to connect the brackets to the unit is included. Overhead supports and ropes
or cabling are not included.
248083486-1 R2
Operators Manual
41
Advertisement
Table of Contents
