Table of Contents
Advertisement
Operators Manual
Controlling the Ionizer
If the Ionizer is installed, its status can be viewed from the Home screen. The Ionizer
toggle button on the left side of the unit tile will be gray if the Ionizer is off, and green if
it is on. Changing its status is as simple as pressing the toggle button.
The indicator lights on the Revolution unit will indicate when the ionizer is on.
The Admin user can choose to not display the Ionizer toggle on the Main Screen:
Press on the More Options button
Screen. Select Preferences from the menu, and the Preferences screen will display. The
last option on this screen will be a toggle for "Ionizer Component". With this toggle to
the left, the Ionizer toggle will not display on the Main Screen.
Viewing Sensor Information
Due to the installed Sensor Pack, the FILTR app is able to display the Temperature (in
degrees Fahrenheit or Celsius, see the "More Options: Preferences" section), Relative
Humidity (in %), PM (Particulate Matter 2.5um) levels, and VOC (Volatile Organic
Compounds) levels at the Revolutions location.
If the Sensor Pack is not installed, the Temperature and RH indicators will not be shown,
and the PM and VOC indicators will be grayed out.
Temperature and
Relative Humidity
Figure 4-12
24
Ionizer Off:
VOC Icon
PM Icon
Ionizer On:
in the lower right corner of the Main
Figure 4-13
FILTR Revolution
The Sensor Pack
samples through
these holes
248083486-1 R2
Advertisement
Table of Contents
