Table of Contents
Advertisement
FILTR Revolution
HEPA Filter
The third filtration stage is the HEPA filter.
Air is forced through the HEPA filter before returning to the environment. This filter is
rated at MERV 17, representing a 99.98% efficiency at removing particles as small as 0.3
microns from the environment. This filter is capable of capturing carbon dust, viruses,
bacteria, and smoke particles, providing an exceptionally clean output from the
Revolution.
Bipolar Ionization
Ionization
In the output of the Revolution unit is the Ionizer. This patented bi-polar ionizer
produces both negatively charged air molecules and positively charged air molecules.
These charged molecules produce several effects:
• Ionized particles can kill live bacteria in surrounding atmosphere. This provides
an immediate benefit of cleaning the Revolutions output air even more, and
helping to scrub clean the air around the unit.
• The charged molecules attach themselves to airborne contaminants and
allergens. The change in mass for the particles causes them to become heavier
than the surrounding air molecules, enabling gravity to pull down the
contaminated air and prevent it from spreading.
• VOCs (Volatile Organic Compounds) in the surrounding area can be neutralized
by these charged particles, removing chemical contaminants that could cause
long-term health effects.
248083486-1 R2
Figure 1-4
Operators Manual
3
Advertisement
Table of Contents
