Page 4
Lighthouse Worldwide Solutions. The information contained herein is subject to change without notice. Lighthouse Worldwide Solutions is not responsible for any damages arising out of your use of the FILTR Revolution Air Filtration System. FILTR Revolution is a trademark of Lighthouse Worldwide Solutions.
Controlling the Fan Speed ....................13 Turning the Ionizer On and Off ..................14 Filter Indications ....................... 15 WiFi Access Point Provision ....................16 Using The FILTR App ..............19 User Registration ......................19 Home Screen Overview..................... 21 Adding A Device ........................ 22 Controlling Fan Speed .......................
Page 8
Operators Manual FILTR Revolution More Options: Add & Share FILTRs ................... 36 More Options: Provision FILTR ..................37 More Options: Preferences ....................38 More Options: Profile ....................... 39 External Accessories ..............41 Overview of External Accessories ..................41 Vertical Wall Mounting ..................... 42 Ceiling Mounting .......................
Operators Manual 1 Introduction The FILTR Revolution Air Filtration System was engineered to combat all forms of air pollution, from mold spores and smoke particles to viruses and microbes. Using FDA regulations as a base, the Revolution provides superior protection and filtration in a mobile, affordable package.
FILTR Revolution Superior Filtration Pre-Filter The Revolution starts the filtration process with a Pre-Filter rated at MERV 8. Figure 1-2 MERV stands for Minimum Efficiency Reporting Value, a standard scale to rate the effectiveness of air filters. The MERV 8 rating of the Pre-Filter represents the filters ability to control contaminants of down to 3.0 microns in size, removing contaminants...
Revolution. Bipolar Ionization Ionization In the output of the Revolution unit is the Ionizer. This patented bi-polar ionizer produces both negatively charged air molecules and positively charged air molecules. These charged molecules produce several effects: • Ionized particles can kill live bacteria in surrounding atmosphere. This provides an immediate benefit of cleaning the Revolutions output air even more, and helping to scrub clean the air around the unit.
Figure 1-5 Temperature The FILTR app can display the temperature at the Revolution unit. This display is able to be set to Fahrenheit or Celsius, and is accurate to within 0.9 degrees F/ 0.5 degrees C. The FILTR app is able to alert the user based on Alarm Settings to conditions that are outside of those desired.
Operators Manual Mounting and Integration The Revolution has optional hardware that enables the user to mount the unit onto wooden studs in a wall, onto Structural Insulated Panels (SIPs) or other metal framing, and even be integrated into a HVAC duct system or ducted on its own.
PM and VOC readings Figure 1-8 Using the FILTR app (listed as FILTR in the Google Play store and FILTR AIR in the Apple App Store), a user can perform the following with the Revolution unit: • Control the Fan speed •...
Revolution is engineered to make filter replacement quick and easy. Access to each filter compartment is gained via four latches being released and the unit opened.
Page 16
Operators Manual FILTR Revolution End Of Chapter This Page Intentionally Left Blank. 248083486-1 R2...
Remove the casters and set them aside for later installation (if desired), then remove the top shipping foam. This foam extends a short way down the sides of the Revolution unit to keep the unit firmly secured in the shipping package.
FILTR Revolution Installing the Casters If desired, the casters can be attached to the pedestal on the bottom of the Revolution unit for easier mobility. To install them, lay the unit on its side to expose the pedestal as shown in Figure 2-2.
See Chapter 3, Using the Keypad, for instruction on using the keypad to control the unit, including activating the Ionizer and setting the unit up for wifi communication. See Chapter 4, Using the FILTR app, for instruction on connecting the unit to the FILTR app and using the app to control the unit.
Page 20
Operators Manual FILTR Revolution This Page Intentionally Left Blank. 248083486-1 R2...
The Revolution unit comes with a physical interface consisting of six LEDs and two buttons. Figure 3-1 With the Revolution unit plugged in and turned on, the Keypad can be used for a variety of functions, including: • Controlling the fan speed •...
Operators Manual FILTR Revolution Turning the Ionizer On and Off The Ionizers operation can be controlled from the keypad. Press both the (+) and (-) buttons on the keypad and hold them down. Any illuminated flow LEDs will go dark, then after three seconds the bottom flow LED will illuminate.
FILTR Revolution Operators Manual Filter Indications The first two LEDs on the left side of the keypad show the status of the standard HEPA filter and the Pre-Filter/Carbon Filter. During normal operation these two LEDs should be off. Figure 3-5...
LED On: Unit connected to End Point (i.e. cloud server) Changing WiFi Status The unit can be connected to an Access Point and set up to communicate with the FILTR app. To initially set up the Revolution unit to connect to an Access Point follow these steps: 1.
Page 25
11. The Wifi Status LED will turn a solid green when the connection is complete, indicating the connection to your Wifi router and the cloud server. 12. Open the FILTR App to register your device. See Chapter 4 for information about using the FILTR app.
Page 26
Operators Manual FILTR Revolution End Of Chapter This Page Intentionally Left Blank. 248083486-1 R2...
A data connection must be present for operational control via the FILTR app. The app can be found in the Google Play store as FILTR and in the Apple App Store as FILTR AIR. See the “Wifi Access Point Provision” section of Chapter 3 to set up the Revolution unit for communication with a smartphone running the FILTR app.
Page 28
Home screen. Listed devices are unique to each users login. Once a Revolution device is added to a user’s account, it will appear on any device that user logs in to.
“dummy” values will be displayed. See the “Adding a Device” section to connect to your Revolution unit. For each listed Revolution unit, you can view the Device Name, change the fan speed, toggle the Ionizer on or off, access the Info and Settings (swipe left for this menu), select the device for display on the Graph and Compare screens, and view the Temperature, Relative Humidity, PM, and VOC readings.
FILTR Revolution Adding A Device At this point, the Revolution unit needs to be connected to a Wifi Access Point. See the “WiFi Access Point Provision” section of Chapter 3 for setting up the Revolution unit for communication with the FILTR app.
Controlling Fan Speed As long as the Revolution is turned on (must be done on the unit itself) and connected to Wifi, the app is able to control the speed of the fan. There are four speeds that can be set: Off, Low, Medium, and High.
Ionizer toggle will not display on the Main Screen. Viewing Sensor Information Due to the installed Sensor Pack, the FILTR app is able to display the Temperature (in degrees Fahrenheit or Celsius, see the “More Options: Preferences” section), Relative Humidity (in %), PM (Particulate Matter 2.5um) levels, and VOC (Volatile Organic...
Page 33
FILTR Revolution Operators Manual Temperature: This position will list the air temperature in degrees Fahrenheit or Celsius, with an accuracy of +/- .9 degrees Fahrenheit (+/- 0.5 degrees Celsius). Depending on the temperature range set in the Alarm Settings (see “Alarm Settings” section) the color of the text may be green, indicating it is well within the range set;...
Operators Manual FILTR Revolution Viewing Device Info In the Home Screen, swipe left or press the arrow in any Revolution unit tile to display a side menu with three options. Figure 4-14 Press the Info icon to bring up the FILTR Info screen.
FILTR Revolution Operators Manual Alarm Settings In the Home Screen, swipe left or click on the arrow in any Revolution unit tile to display a side menu with three options. Figure 4-16 Press on the Alarming icon to bring up the Alarm Settings screen.
Page 36
This will bring up a soft keyboard which will allow you to customize the Room to which the Revolution unit is associated, and the Name of the unit. The Room and Unit names can be up to 20 characters in length, though it is recommended to keep it under 10 for proper displaying on smaller devices.
Page 37
“Apply Globally” saves Alarm Threshold settings only, but it will apply those settings to all Revolution units that the user is Admin for and that have the same Room name. This enables identical settings to be applied to multiple units at once.
Operators Manual FILTR Revolution Deleting A Device In the Home Screen, swipe left or click the arrow in any Revolution unit tile to display a side menu with three options. Figure 4-19 To remove a Revolution unit from control of the current user, press on the Delete icon.
FILTR Revolution Operators Manual Graph View The FILTR app has the ability to display collected Sensor Pack data in graph form via the Graph View screen. First, locate the Tile Selector icon on the Revolution unit tile that graphed data is desired for. This icon is in the lower right corner of the tile.
To select a unit for comparison, press the white Tile Select circle in the bottom left of the desired Revolution’s tile. It will change to contain a check mark. Select a second Revolution tile for comparison with the first, and the Compare icon at the bottom of the Main screen will become selectable.
General Service Alert When a component within the Revolution is malfunctioning, or has stopped working for some reason, the FILTR app will alert the user with a wrench icon in the upper right corner of the affected Revolution units’ tile.
Page 42
See Chapter 6 for filter replacement and timer reset procedures. When the FILTR app alerts the user with the above warnings, it will also send an email to the user indicating the nature of the alert for the particular unit. The email will look similar to the one shown below.
• Add & Share FILTRs is the access point for adding new units and sharing current ones • Provision FILTR aids in connecting a new Revolution unit to wifi • Preferences contains color theme options and the Metric and Ionizer toggles •...
Each unit can only be paired to one user via the steps found earlier in the “Adding A Device” section. However, the FILTR app also allows units to be shared to other users, designating the original user as Admin and others as Users.
• Enter the information for the desired network connection and click Connect Once the Revolution unit is connected to a wifi signal, go to the “Add & Share FILTRs” screen and click on the SCAN QR CODE button. Scan the QR code located above the power connection port on the unit to add the Revolution to your device.
Pressing the back arrow button from the Preferences screen will return the user to the Main screen and display the Alert shown below. Figure 4-36 As indicated, changes made in the Preferences screen will not take effect until the FILTR app has been restarted. 248083486-1 R2...
FILTR Revolution Operators Manual More Options: Profile Pressing the Profile button in the More Options menu will bring up the Profile screen, allowing the user to view and make changes to their user profile. The Profile screen allows the user to change the information that was entered when registering.
Page 48
Operators Manual FILTR Revolution This Page Intentionally Left Blank. 248083486-1 R2...
The wall mounting kit comes with four main pieces: Two brackets that anchor to the wall and two brackets that connect to the top and bottom covers of the unit and enable the Revolution to hang on the brackets installed on the wall. Associated hardware is also included.
Operators Manual FILTR Revolution Vertical Wall Mounting The wall mounting hardware kit is designed to facilitate mounting the Revolution onto a wall that can support its weight. Hardware is included to support mounting on wooden and SIPs walls. Lower unit bracket...
Page 51
Face towards the “wall-side” Figure 5-2 Lay the Revolution unit on its side and remove the Pedestal from the bottom of the unit by removing the four screws holding it to the base. Remove 4 screws Install 3 screws Face towards “wall side”...
Page 52
FILTR Revolution Install the Wall Brackets Locate the position on the wall at which the Revolution will be located. Install one of the Wall Brackets at the height the bottom of the unit is desired to be. Wall Bracket screws are provided to secure the bracket to the wall;...
Page 53
Operators Manual Hang the Revolution With both Wall Brackets in place, the Revolution can be hung onto the brackets. Once the brackets seat together, install the Locking Pin into the Upper Wall Bracket and secure it in place with the Retainer.
The first step in installing the Ceiling Mount Brackets is to determine which side of the Revolution unit will be towards the ceiling. It is suggested to keep both the side with the Keypad and the side with the Power Port accessible and visible from the ground.
Page 55
FILTR Revolution Operators Manual Install Lower Bracket Lay the Revolution unit on its side and remove the Pedestal from the bottom of the unit by removing the four screws holding it to the base. Face towards “ceiling side” Remove 4 screws...
Then set one of the Duct Adapter Brackets onto the top of the Revolution unit and secure it using eight of the included bracket screws.
Page 57
Figure 5-19 Install Lower Duct Adapter Lay the Revolution unit on its side and remove the Pedestal from the bottom of the unit by removing the four screws holding it to the base. Install one of the Duct Gaskets over the mounting holes, then secure a Duct Adapter to the unit using five of the supplied screws, as one of the mounting options will also be installed.
Page 58
Operators Manual FILTR Revolution Attach either the Lower Unit Bracket from the Wall Mounting kit or one of the Ceiling Mounting Brackets to the bottom of the unit, installing it on top of the Duct Adapter. Secure this bracket with three of the unit bracket screws.
Operators Manual 6 Filter Maintenance The Revolution unit comes with three filters that will require periodic maintenance. Standard filters for all units are the Pre-Filter, HEPA filter, and Carbon Filter. The HEPA and Pre-Filter LEDs on the Unit Interface, along with the notifications in the App, will indicate when a pre-set amount of time has gone by and these filters should be serviced.
Operators Manual FILTR Revolution Filter Locations The replaceable filters inside the Revolution unit are all easily accessible. See Figure 6-1 for the locations of the various filters. HEPA Filter located under top cover Pre-Filter and Carbon Filter located in the Filter...
The filter may need to be changed out more frequently if the Revolution unit is in an area with a large amount of pollution, or the lifetime may be able to be extended if the area has very light pollution.
Page 62
Cleaning the Pre-Filter The Pre-Filter can be cleaned off with regular soap and water. Ensure that the filter is dried thoroughly before re-installing it into the Revolution. Re-Installation of the Filter Tray With cleaning of the Pre-Filter accomplished, replace the Pre-Filter into the bottom of the Filter Tray, followed by the Carbon Filter.
Page 63
FILTR Revolution Operators Manual Once the filters have been installed, replace the top section of the Revolution unit. Ensure that the keyed sections of the unit mate up properly. Note the keyed sections of the Filter Tray. There are two pairs of them on opposite sides of the tray.
FILTR app will indicate when this time period has elapsed. The filter may need to be changed out more frequently if the Revolution is in an area with a large amount of pollution, or the filters lifetime may be able to be extended if the area has very light pollution.
Set the cover back onto the top, ensuring that the outer groove sits onto the edges of the unit, and secure the four latches onto the cover. This seals the outer cavity of the Revolution and ensures that the air is forced to go through the filter before returning to the environment.
Page 66
Operators Manual FILTR Revolution This Page Intentionally Left Blank. 248083486-1 R2...
FILTR Revolution Operators Manual Appendix A: Limited Warranty Limitation of Warranties A. Lighthouse Worldwide Solutions (LWS) warrants that all equipment shall be free from defects in material and workmanship under normal use for a period of one year from date of shipment to Buyer. LWS does not warrant that operation of the software will be completely uninterrupted or error free or that all program errors will be corrected.
Page 70
Service and Support Tel. 1-800-945-5905 (USA Toll Free) Tel. 1-541-770-5905 (Outside of USA) techsupport@filtrscience.com www.filtrscience.com...
Page 72
Service and Support Tel. 1-800-945-5905 (USA Toll Free) Tel. 1-541-770-5905 (Outside of USA) techsupport@filtrscience.com www.filtrscience.com...