Table of Contents
Advertisement
Operators Manual
Change Room and Unit Name
To change the Room or Unit name, press on the box displaying the current Room/Unit
name. This will bring up a soft keyboard which will allow you to customize the Room to
which the Revolution unit is associated, and the Name of the unit.
The Room and Unit names can be up to 20 characters in length, though it is
recommended to keep it under 10 for proper displaying on smaller devices.
Email Alerts
With all of the alarm thresholds, when the limits are exceeded the app will send an
email notification to the user about the alarm, indicating the Unit, Room, and type of
reading that exceeded the limit. The email will look like the following:
Changing Alarm Thresholds
The four slider bars on this screen have threshold points which are all manipulable.
These allow the user to set custom ranges for the RH, Temperature, PM2.5, and VOC
sensors.
The Relative Humidity slider bar is used to set an acceptable range for the RH. Areas
beyond the lower and upper points generate alerts for the user.
28
Figure 4-18
Green = optimum range
Red= Alarm, email alert
Yellow = within 15% of limit
FILTR Revolution
248083486-1 R2
Advertisement
Table of Contents
