Table of Contents
Advertisement
Operators Manual
Install the Wall Brackets
Locate the position on the wall at which the Revolution will be located. Install one of the
Wall Brackets at the height the bottom of the unit is desired to be. Wall Bracket screws
are provided to secure the bracket to the wall; select the proper screws for the medium
being mounted to (wood or metal). Four of each type are provided for each Wall
Bracket.
Place the Revolution unit onto the installed Wall Bracket. Slide the other Wall Bracket
into the Upper Unit Bracket and use the Wall Bracket to mark the wall at the location it
is desired to be installed.
Remove the Revolution from the lower bracket, then install the upper Wall Bracket in
the marked location, using the proper screws for the wall medium.
44
Figure 5-5
Figure 5-6
Ensure hooks are facing up
Install screws in whichever
holes best mount the
bracket
(into wall studs is optimal)
Ensure hooks are facing up
Install screws in whichever
holes best mount the
bracket
(into wall studs is optimal)
Figure 5-7
FILTR Revolution
248083486-1 R2
Advertisement
Table of Contents
