Table of Contents
Advertisement
Operators Manual
Onboard Sensors
The Revolution unit comes with a Sensor Pack that expands the user's ability to track
the environment surrounding the unit. The Sensor Pack can communicate information
about the Temperature, Relative Humidity, VOC levels, and Particulate Matter levels.
The FILTR app is required to view the data generated by these sensors, and enables
users to track these metrics from anywhere they have a data connection.
Temperature
The FILTR app can display the temperature at the Revolution unit. This display is able to
be set to Fahrenheit or Celsius, and is accurate to within 0.9 degrees F/ 0.5 degrees C.
The FILTR app is able to alert the user based on Alarm Settings to conditions that are
outside of those desired.
Relative Humidity
A RH sensor within the Revolution unit provides Relative Humidity information to the
user via the FILTR app. This sensor has an accuracy of +/- 3%.
The RH sensor information accessible via the app allows the user to track RH trends, and
alerts the user to undesired changes. Updates are provided every ten minutes.
Volatile Organic Compounds
VOCs are organic chemicals that have a high vapor pressure at room temperatures.
These chemicals can cause health issues via both short-term and long-term exposure.
This class of contaminants is analyzed by the Sensor Pack on the Revolution unit, and is
communicated to users via updates on the FILTR app every 10 minutes. Measurement is
recorded and displayed in parts per billion.
Particulate Matter
The Revolution unit's Sensor Pack contains a PM2.5 sensor. This sensor measures
Particulate Matter in the environment less than or equal to 2.5 microns in diameter.
The FILTR app updates the PM reading every ten minutes, and records and displays the
measurement in micrograms per cubic meter, ug/m³.
4
Figure 1-5
FILTR Revolution
The Sensor Pack, located on the
lower left side of the Revolution,
pulls in and exhaust air through
these holes
248083486-1 R2
Advertisement
Table of Contents
